Exposed Aggregate
40+ stone blends, sealed for Melbourne weather. The decorative finish that gives grip, hides marks and adds real value to your property.
Exposed aggregate is the finish that suits every Melbourne home. Whether you've got a brick veneer in Dandenong North, a rendered contemporary in Springvale, or a period home in Noble Park, there's a stone blend that complements it. The surface is textured, not flat — which means grip when it's wet, a look that doesn't show every oil drip and tyre mark, and a finish that wears harder than plain concrete. It's the upgrade that most Dandenong homeowners make when they're doing a driveway, and it's one of the few finishes that genuinely adds value to a property.
Why Exposed Aggregate
The exposed stone surface gives real traction — important on sloped driveways, around pools, and anywhere water sits on plain concrete.
Sealed properly, exposed aggregate resists oil and tyre marks. A quick pressure clean and it looks new again. No special cleaners needed.
The textured surface camouflages oil drips, tyre marks and leaf stains that would stand out sharply on plain concrete.
The colour comes from the stone aggregate, not a surface coating. It doesn't fade, chip off, or wear away — the colour you see on day one is the colour you get in year ten.
A well-finished exposed aggregate driveway adds kerb appeal and typically returns its cost at sale. It's one of the few concreting upgrades that buyers notice.
Driveways, paths, patios, alfresco areas, pool surrounds — anywhere you want a surface that looks good and performs. Equally at home on a front driveway or a backyard entertaining area.
Stone Blends
Warm tones that suit brick veneer homes — the most popular choice across Dandenong's older suburbs. Pairs naturally with red and orange brick without clashing.
Cool, modern tones that suit rendered contemporary homes. Pairs well with dark window frames, colorbond fencing and minimalist landscaping.
Bright, clean stone with a premium look. Suits contemporary architecture and higher-end builds. Costs more, but the finish is striking and the stone wears extremely hard.
FAQ
For most Dandenong homes, yes. Exposed aggregate gives better grip when wet, hides oil and tyre marks, wears harder than plain concrete, and the real stone colour runs all the way through. It typically adds resale appeal and suits both brick and render homes.
You can walk on it 24–48 hours after the pour. You can drive on it after 7 days, same as plain concrete. Full strength takes 28 days, but 7 days is the rule for vehicle traffic.
Not if the wash-off is timed correctly and the slab is sealed. Stones popping out is a sign of poor wash-off timing — washing too early, which loosens the stone before the paste has set enough to hold it. That's why the wash-off is the step we get right.
Yes, with a minimum charge. A single path, a small patio, a side strip — all welcome. We'd rather do the job right than turn it away because it's small.
Every 2–4 years, depending on traffic and sun exposure. A fresh coat of sealer brings the stone colour back up and keeps the surface protected from oil and staining.
Free Written Quote
Call now or send your details — we'll show you stone blend samples and give you a written quote.