Pool Surrounds
Exposed aggregate with finer 7mm stones for barefoot comfort, or honed salt-and-pepper for a premium look. Strip drains set to falls, coping tooled crisp, sealers chosen for chlorine and sunscreen.
There is one non-negotiable on a pool surround: grip when it's wet. Everything else — the colour, the finish, the look — comes after safety. A pool surround that looks beautiful and becomes an ice rink when wet is a failure, and we won't pour one. We start with the grip and build the look around it.
We pour two finishes for pool surrounds. Exposed aggregate with a finer 7mm stone is the standard — the smaller stones give grip without being rough underfoot, so kids can run on it barefoot all day without sore feet. For a more premium look, a honed salt-and-pepper finish gives a smoother surface with enough texture for wet grip. Both are sealed with a penetrating sealer chosen for chlorine and sunscreen resistance, because those are the two chemicals that break down standard sealers fastest.
The details that make a pool surround work: strip drains set to falls so water runs to the drain, not across the paving; coping tooled crisp at the pool edge so the transition from water to surround is clean; and a sealer that's rated for the chemicals a pool throws at it. We handle all three. We also coordinate with your pool builder's schedule so the pour happens at the right stage of the build — after the shell, before the fencing.
What We Build
The standard for pool surrounds. Finer stones than a driveway mix — 7mm instead of 10–14mm — so the surface is grippy when wet but comfortable underfoot. Real stone colour all the way through. Strip drain set-out and sealing included.
A smoother premium finish. We pour, cure, then mechanically grind the surface back to a light exposure — enough texture for wet grip, without the full exposed stone look. The finish that transitions best from indoor living areas to the pool.
The edge where the surround meets the pool. We tool it crisp and square — or to the profile your pool builder specifies — so the transition from water to paving is clean and safe. Coping is part of the surround pour, not a separate charge.
Set to falls so water runs to the drain, not across the paving. We set the strip drain at the low point of the surround and grade the slab to it. Included in the m² rate, not an extra.
FAQ
Not with the right stone. We use a finer 7mm stone for pool surrounds rather than the larger 10–14mm stones we'd use on a driveway. The finish is grippy when wet but comfortable underfoot — kids can run on it all day without sore feet. If you want an even smoother surface, a honed salt-and-pepper finish gives grip without the exposed stone texture.
Yes. We coordinate with the pool builder and pour at the right stage — usually after the shell is in and the coping line is set, but before the fencing and landscaping go in. We work to the pool builder's program so the surround pour doesn't hold up the rest of the build. We'll talk to your pool builder directly if that's easier for you.
Free Written Quote
Call now or send your details — we'll coordinate with your pool builder and give you an honest itemised price in writing.